Hi everyone its been a while since i last posted. This thing is for anyone that plays maplestory www.mapleglobal.com its an mmorpg.
*Note* I am not maker of this i do not take any credit.
http://www.youtube.com/watch?v=HvIK4KKU_JM

BEGINNER

Analog stick = move
Dpad = nothing
Cross = Jump
Square = Attack
Triangle = Item Pickup
Circle = Snail Throw
L = Hp potion
R = Mp potion

HERMIT
Analog Stick = move
Dpad up = Haste
Dpad right = Booster
Dpad down = Shadow Partner
Dpad left = Drain
Cross = Jump
Square = Attack
Triangle = Pickup
Circle = Lucky Sevens

*UPDATE* Programs released I TAKE NO RESPONSIPLTY OF W/E HAPPENS TO UR PSP


Estimated setup time = 10 ~ 15 mins
All the programs you need can be downloaded here http://rapidshare.de/files/27510776/MSPSP.rar.html


PS - feel free to scan it for virus's at http://www.virustotal.com/en/indexf.html

1) Setting up the PSP as a joystick for the PC
* Open the PSP directory and edit the proper wifi.cfg for your PSP version and set the IP of the computer you are going to use this on. On your PC go Start -> Run and type cmd. Then type ipconfig and get your IP
* Copy the correct directory to your PSP depending on whether you have a 1.0 or 1.5 PSP. If you use a custom firmware mod that allows the use of single EBOOT.PBP files on a 1.5 PSP then you can use the 1.0 directory.
* Download and install PPJoy.
* After it is installed open up your Control Panel and run Parallel Port Joysticks.
* When the window comes up click Add, then where it says Parallel Port change it to Virtual Joystick at the bottom and then Add on the next screen.
* It will want to install some drivers so either have it scan automatically or point it to the directory you install PPJoy to.
* After it is done installing, click the PPJoy Virtual joystick 1 in the menu and click Mapping,
* Choose "Set a custom mapping for this controller" and click Next.

* Axes = 2 (X Axis and Y Axis)

Buttons = 8
POV hats = 1

* X Axis = Analog 0

Y Axis = Analog 1

* These buttons are up to you to set. I left them all default but changed Button 7 and Button 8 to be correct because they ARE WRONG default.

Button 1 = Digital 0
Button 2 = Digital 1
Button 3 = Digital 2
Button 4 = Digital 3
Button 5 = Digital 4
Button 6 = Digital 5
Button 7 = Digital 11
Button 8 = Digital 10

* Directional button POV

North = Digital 6
East = Digital 7
West = Digital 9
South = Digital 8

* Run the SocketText.exe program. It will open a Command Prompt window. Just minimize it and forget about it. If it just opens and closes, something went wrong. Good luck.
* Now start the program no your PSP and it should connect to your computer and basically be working. You'll find out in the next step.
* Go back to your control panel and go to Game Controllers. Click on the PPJoy Virtual joystick 1 and choose Properties. On the screen that comes up you should be able to press buttons on the PSP and have them show as working on the screen. I recommend calibrating the Analog Stick too.
* Enjoy!

2) Settign up the joystick as keystrokes

* Run Joy2Key

* Either open up my Maple Story config or make your own config file

* Configure what you want each button to do
heres what the Buttons on Joy2Key mean on the PSP

LEFT = analog left
RIGHT = analog right
UP = analog up
DOWN = analog down
Button 1 = Triangle
Button 2 = Circle
Button 3 = Cross (X)
Button 4 = Box
Button 5 = L
Button 6 = R
I believe 7 and 8 are start and select, I dont use them

3) Test it

* leave sockettest and Joy2Key running and then run MS

* Hopefully it works! The program displays your battery % so you know how long you have until the batteries die. Good luck and happy mapling with your PSP!

__________________