WE NEED AN XBOX SECTION NOW!

What You Need For Ur Bridge


~Xbox w/ Live (duh)
~Computer w/ Internet
~Cat5 Crossover Cable
~Two Ethernet Ports On Ur Com
NOTE: If you just have one on ur com then u
might want to buy a USB Network adapter what that is
it basicly adds a ethernet port on ur computer.

Programs For Bridging
Zone Alarm
Commview
Auto Team Standby(Recommend)



Setting Up Your Bridge

Now ur setup should be like this right now
Computer--->Ethernet--->Router
Router--->Ethernet--->Xbox

Now to bridge have ur setup like this
Computer--->Ethernet--->Router
Computer--->Crossover--->Xbox

Now im guessing u have ur usb setup and ur connections
are set to bridge
also this is not a laptop bridge this is a wired desktop
Bridge k now that we have that setup we move on...

Bridging Your Connections
Ok now ur networks should be
~local area connection
~1394 Connection
~local Area Connection2
k ur local area connection is from ur com to ur router
and ur 1394 connection is ur router to xbox
and ur new one is local Area Connection2 thats
ur com to xbox

Now Forget the 1304 connection
K im gonna call the local area connection internet connection
and the local 2 xbox connection k moving on

right click the xbox connection and hit (TCP/IP)
and properties and change the ip address to 192.168.0.1
and the subnet mask to 255.255.255.0
and hit ok then highlight xbox and internet connection and hit bridge connections and then
ur connections are bridged now if ur internet doesnt
work reset ur com and ur router and u should be fine
k now im assuming u have zone alarm now put in these ip's
if u dont have zone alarm get it in the bridging programs

Bungie-65.59.234.161
Xbox Live-207.46.246.6
and ur network should be on internet

and now put both of ur firewalls to low now try and sign on
If u can sign on congrats also to sign on live ur computer
must be on
------------------------------------------------------------------

How To Bridge Somebody Host

First make sure they made the party
Second open up commview and get his ip
and put it in zonealarm under trusted
Third put ur internet on high and ur trusted on low
-----------------------------------------------------------------

How To Boot Someone From Matchmaking

K first make sure ur host now haveboth ur firewalls
on low and commview open and make sure u started the party
next go into matchmaking now if ur in teamslayer i reccomend
booting only two and if ur in double team just team standby
k make sure u have everybodys in ur party under an alias
in commview so u dont boot them next when ur configuring the game
game start commview and the people u dont have an alias bootthem only two
and make sure the ip doesnt start with 192.168 cuz that aint their ip
boot the other ip so yea put the ip into zonealarm under blocked
then move ur internet firewall on medium and they should lag out
NOTE: Never boot every one on the opposite team
cuz u wont get experience
-----------------------------------------------------------------------
How To Team Standby

ok first u should be bridged host first cuz u need to be host to team standby.
Ok now add everyone in ur ip's party and make them trusted and make sure that both ur firewalls are on low now hit apply now go i
nto the game and once ur in the game move it to medium this does not team standby ok now that its on medium move it to high for like threee seconds then put it back to
med and thats team standbying for instance lets say
moving ur firewall on high is pulling out ur cord or pressing the standby button and putting it on medium is putting the cord back in or unstanbying.
Now u can team standby.

ANy Questions Ask me
THank you pinky for this